Rix Lynx Offshore Vessel

The Rix Lynx crew transfer vessel is a 27m Offshore High-Speed Support Vessel. It is able to perform in extended significants wave heights. Desk space has been maximised for a 1 x 20ft container and the full payload is up to 20T allowing for charterers and their equipment.

The Rix Lynx is able to perform in extended significant wave heights. The Seasight fender design has a knuckle to improve docking performance and reduce the step distance between the vessel and the Transition Piece.

Deck space has been maximised to good working areas forward and aft, each area have space for 1 x 20’ container, the full pay load is up to 20T, allowing flexible working for charterers and their equipment.

The vessel is provided with full safety equipment exceeding Flag standards, including the fitting of EPIRBS, SARTS, and M.O.B. rescue systems. A Sea-Marshall M.O.B. locating system is fitted as standard.

Accommodation & Comfort

Individual crew and passenger seating is provided benefiting from full air suspension seats, seatbelts and head-rests for maximum safety. The accommodation and bridge is fully air conditioned with all decks fitted with noise-deadening materials to reduce noise levels to a minimum to provide a comfortable transfer environment. The vessel is provided with a ‘wet’ changing room with lockers, WC and shower, along with a galley in the main passenger area.

Accommodation is provided for 6 crew members based on a 4 x 2 berth cabins.

The vessel has a flat screen TVs with DVD player and satellite TV receiver, and a full satellite Wi-Fi link is available for passengers to use.

Additional Information

The vessel is equipped with a Fuel Transfer system, and it is possible to fit an additional 5,800Lt of tank capacity to the vessel for additional endurance or for bunkering duties.

A 3 point mooring system is in place to allow diving operations, with ample deck space for a diving spread including a decompression chamber if required. Boarding platforms are provided aft to assist divers with entry and exit to the water.

A 415V AC power supply is available for use on board to power contractor’s equipment and machinery.

A High-Pressure Washer is fitted for use at the bow for TP cleaning duties.

A crane is fitted on the foredeck area which is suitable for the loading of equipment in port, or for the raising and lowering of ROVs etc. though the integrated moon pool on the foredeck.

 

Next Available: September 2017

Enquire Now
Technical Specification
  • MCA  HS-OSC Workboat Code Category 1 - up to 150 miles offshore
  • LOA 27.4m, Beam 8.00m, Draught 1.45m
  • Wind Farm Service Vessel
  • Speed 27.5Kts
  • Main machinery 2 x MAN D2842 LE463 
  • 2 x Hamilton HM651 Waterjet 
  • Cargo 20 tonnes  (full DWT 30 tonnes)
  • Deck area  1x 20ft containers, Fwd 1x 10ft container Aft
Download Technical Specification Download General Arrangement

Work with us

Rix Panther Offshore Vessel

  • ALN 145 ‘Rix Panther’
  • Wave Master Class
  • Wind Farm Service Vessel
  • LOA 18.9m Beam 7.2m Draft 1.4m Disp't 37.5t
  • Speed 24kts
  • MCA Cat 2
  • Main Machinery 2 x Cummins QSK 19 800 bhp
  • 2 x fixed pitch propellers

 

Download Technical Specification Download General Arrangement
Rix Tiger Offshore Vessel

  • ALN 156 ‘Rix Tiger’
  • Wave Master Class
  • Wind Farm Service Vessel
  • LOA 18.9m Beam 7.2m Draft 1.4m Disp't 37.5t
  • Speed 24kts
  • MCA Cat 1
  • Main Machinery 2 x Cummins QSK 19 800 bhp
  • 2 x fixed pitch propellers

 

Download Technical Specification Download General Arrangement
Rix Lion Offshore Vessel

  • FCS 2610 ‘Rix Lion’
  • High Speed Offshore Service Vessel
  • LOA 26.30m Beam 10.40m Draught 1.98m – 2.20m
  • Speed 27kts
  • MCA Cat 1
  • Main Machinery 2 x Caterpillar C32 TTA B engines
  • 2 x fixed pitch propellers

Download Technical Specification
Rix Lynx Offshore Vessel

  • MCA  HS-OSC Workboat Code Category 1 - up to 150 miles offshore
  • LOA 27.4m, Beam 8.00m, Draught 1.45m
  • Wind Farm Service Vessel
  • Speed 27.5Kts
  • Main machinery 2 x MAN D2842 LE463 
  • 2 x Hamilton HM651 Waterjet 
  • Cargo 20 tonnes  (full DWT 30 tonnes)
  • Deck area  1x 20ft containers, Fwd 1x 10ft container Aft

Download Technical Specification Download General Arrangement
Rix Leopard Offshore Vessel

  • MCA  HS-OSC Workboat Code Category 1 - up to 150 miles offshore
  • LOA 27.4m, Beam 8.00m, Draught 1.45m
  • Wind Farm Service Vessel
  • Speed 27.5Kts
  • Main machinery 2 x MAN D2842 LE463 
  • 2 x Hamilton HM651 Waterjet 
  • Cargo 20 tonnes  (full DWT 30 tonnes)
  • Deck area  1x 20ft containers, Fwd 1x 10ft container Aft

Download Technical Specification Download General Arrangement
Rix Cheetah Offshore Vessel

  • DUN 001 'Rix Alicat Workboat'
  • Alicat 25m workboat
  • Wind Farm Service Vessel
  • LOA 25.3m beam 6.4m Draft 1.85m Disp't 53T
  • Speed 25Kts
  • MCA Cat 1
  • Main machinery 2x CAT C32 1320bhp
  • 2 x fixed pitch propellers

Download Technical Specification Download General Arrangement
Enquire NowRix Lynx Offshore Vessel